01
Energy baseline
Fixed fee.
- Rules check per site
- 30 days of measurement
- Baseline and load-profile report
- Fee credited when you subscribe
Use case · Energy monitoring · Netherlands
The rules ask for measured energy data. Make it work for you.
From the energy saving obligation to the new EED audit and building automation, Dutch rules increasingly ask companies to know, measure and report their energy use. We install the measurement, deliver the figures your auditor needs, and turn them into savings, as a service.
- Energy saving obligation
- EED audit
- ISO 50001
- GACS
- Measured, not estimated
The situation
More rules, based on measured use
- The audit threshold drops. Under the revised EED, the audit duty follows energy use: from 10 TJ (about 2.8 GWh) a year.
- Audits need measured data. Total measured use and an electricity load profile for working and non-working days.
- Larger users need a system. Above 85 TJ, a certified energy management system by 11 October 2027.
- Buildings must monitor. Heated or cooled halls above 290 kW need continuous energy monitoring since 2026.
The outcome
Compliance and savings from one set of figures
- Energy use per site, line and machine, measured, not estimated.
- Load profiles ready for the audit, for working and non-working days.
- The figures for each report: notification, audit, energy management evidence.
- Savings measures with their effect, followed month by month.
Where the data comes from
This runs on measured data. There are three ways to get it, and only the third involves buying anything from us.
-
01
Data you already have
A historian, SCADA, submeters, your own exports — often more than people expect.
-
02
Data from a supplier
Your machine builder's, your energy supplier's, your grid operator's.
-
03
Sensin Via
When neither exists, we install the measurement and run it as a service.
How it is built
Measured at the source, ready for your auditor
-
Your site
- Main connection
- Sub-meters
- Machines and lines
- Compressed air
-
Via Gateway
- Collect · buffer
- Own 4G
- Remotely managed
-
Sensin cloud
- Baseline
- Load profiles
- Savings
-
Audit data
- Annual report
- Dashboard
Company IT network
Not used
Combined with your quarter-hour data from your grid operator, with your consent. Nothing passes through your network.
Which rules may apply to you
| Energy saving obligation | From 50,000 kWh electricity or 25,000 m³ gas a year: take all measures with a payback of five years or less | Ongoing |
| Notification obligation | Report the measures you have taken, every four years | 1 Dec 2027 |
| Energy audit (revised EED) | From 10 TJ (about 2.8 GWh) a year: audit with measured use, a load profile and an action plan | 1 Apr 2028 |
| Energy management system | Above 85 TJ (about 23.6 GWh) a year: a certified system such as ISO 50001 | 11 Oct 2027 |
| Building automation (GACS) | Non-residential buildings, factory halls included, with heating or cooling above 290 kW: monitor, record and analyse energy use continuously. From 2030 above 70 kW | Since 2026 |
Sources: RVO, energy saving obligation and notification obligation; RVO, revised EED (Dutch legislation expected after Q1 2027; final rules still to be published); RVO, GACS. Deadlines for the new EED audit apply to companies newly covered. We deliver the measured data and reports; the audit, certification and building control stay with your auditor, certifier and installer.
How it runs
From the rules to measured savings
-
01
Check
Which rules apply to each site, based on your energy use and installations.
-
02
Measure
Meters on the main connection and the largest users, installed de-energised.
-
03
Baseline
Energy use and load profiles for working and non-working days.
-
04
Report
The figures your auditor, certifier or regulator asks for.
-
05
Improve
Savings measures and their effect, followed month by month.
The offer
A baseline first, then monitoring as a service
02
Energy monitoring
Per measuring point, per month.
- Measurement, 4G and platform as one service
- Monthly report and data export
- Ready for audit and ISO 50001 evidence
03
Extensions
Added when you need them.
- Peak and grid-capacity management
- Utilisation and OEE per machine
- Energy data for customer reporting
Who it is for
Energy saving obligation
Manufacturers using 50,000 kWh or more a year.
Newly audit-obligated
Companies around 10 TJ, facing the EED audit.
Large halls
Heated or cooled buildings above 290 kW.
Find out which rules apply to you.
Start with a free 30-minute call, with last year’s energy bills at hand.
Reflection
If your site sits well under the audit thresholds and your energy bill is not a board-level number, measurement is a cost without a return yet. The honest first step is then the grid data you can already request for nothing, and a conversation in a year.