01
Energy baseline
Fixed fee.
- Rules check per site
- 30 days of measurement
- Baseline and load-profile report
- Fee credited when you subscribe
Use case · Energy monitoring · Flanders
The rules ask for measured energy data. Make it work for you.
With the new Flemish energy efficiency rules, the audit duty drops to 10 TJ per site, sites report their energy use every year, and larger users need an energy management system. We install the measurement, deliver the figures your auditor and VEKA ask for, and turn them into savings, as a service.
- EED audit
- Annual reporting
- ISO 50001
- GACS
- Measured, not estimated
The situation
More rules, based on measured use
- The audit threshold drops. From 10 TJ (about 2.8 GWh) per site, an energy audit, instead of 50 TJ today.
- Every year, a report. From 10 TJ, yearly reporting of energy use per carrier and application.
- Measures within three years. Below 50 TJ, measures with a payback under three years must be carried out.
- Buildings must monitor. Heated or cooled buildings above 290 kW need continuous energy monitoring since end 2025.
The outcome
Compliance and savings from one set of figures
- Energy use per site, line and machine, measured, not estimated.
- The yearly figures, per energy carrier and application, ready to report.
- Evidence for the audit and for an energy management system.
- Savings measures with their effect, followed month by month.
Where the data comes from
This runs on measured data. There are three ways to get it, and only the third involves buying anything from us.
-
01
Data you already have
A historian, SCADA, submeters, your own exports — often more than people expect.
-
02
Data from a supplier
Your machine builder's, your energy supplier's, your grid operator's.
-
03
Sensin Via
When neither exists, we install the measurement and run it as a service.
How it is built
Measured at the source, ready for your auditor
-
Your site
- Main connection
- Sub-meters
- Machines and lines
- Compressed air
-
Via Gateway
- Collect · buffer
- Own 4G
- Remotely managed
-
Sensin cloud
- Baseline
- Load profiles
- Savings
-
Audit data
- Annual report
- Dashboard
Company IT network
Not used
Combined with your quarter-hour data from Fluvius, with your consent. Nothing passes through your network.
Which rules may apply to you
| Energy audit | From 10 TJ (about 2.8 GWh) per site: an audit; below 50 TJ, measures with a payback under three years carried out within three years | 1 Jul 2027 |
| Annual energy reporting | From 10 TJ: energy use per carrier and application, reported to VEKA | Yearly |
| Energy management system | Above 85 TJ (about 23.6 GWh): a certified system such as ISO 50001 | 11 Oct 2027 |
| Energy plan | From 100 TJ: a verified energy plan | 1 Oct 2027 |
| Building automation (GACS) | Non-residential buildings with heating or cooling above 290 kW: monitor, record and analyse energy use continuously. By end 2029 above 70 kW | Since end 2025 |
Sources: Flemish government, building automation obligation for non-residential buildings; draft Flemish decree transposing the revised EED, approved in principle on 17 July 2026 (Voka; final text still to be adopted). Thresholds apply per site, on the average yearly energy use. We deliver the measured data and reports; the audit, certification and building control stay with your auditor, certifier and installer.
How it runs
From the rules to measured savings
-
01
Check
Which rules apply to each site, based on your energy use and installations.
-
02
Measure
Meters on the main connection and the largest users, installed de-energised.
-
03
Baseline
Energy use and load profiles for working and non-working days.
-
04
Report
The figures your auditor, certifier or regulator asks for.
-
05
Improve
Savings measures and their effect, followed month by month.
The offer
A baseline first, then monitoring as a service
02
Energy monitoring
Per measuring point, per month.
- Measurement, 4G and platform as one service
- Monthly report and data export
- Ready for audit and ISO 50001 evidence
03
Extensions
Added when you need them.
- Peak and grid-capacity management
- Utilisation and OEE per machine
- Energy data for customer reporting
Who it is for
Newly audit-obligated
Sites around 10 TJ, facing the audit and yearly reporting.
Large users
Sites above 85 TJ, preparing an energy management system.
Large buildings
Heated or cooled buildings above 290 kW.
Find out which rules apply to you.
Start with a free 30-minute call, with last year’s energy bills at hand.
Reflection
If your site sits well under the audit thresholds and your energy bill is not a board-level number, measurement is a cost without a return yet. The honest first step is then the grid data you can already request for nothing, and a conversation in a year.